beautypg.com

Installation – Regency Energy E18 Small Gas Insert User Manual

Page 36

background image

36

Regency

®

E18 Gas Fireplace Insert

INSTALLATION

15. Install supplied support section with 8 screws to reinforce

Firesong fi rebox. (See Diagram 1.13).

16. Repeat Steps 14 & 15 on left side.

17. Remove existing Firesong rating plate from cut out fi rebox.

This rating plate must be retained and affi xed to the unit. (See
Diagram 1.14 and 1.15).

Diagram 1.13

Diagram 1.15

Firesong decal affi xed

Diagram 1.14

18. Final modifi ed fi rebox should look like Diagram 1.15
NOTE: Shown with fl ue collar and 6" fl ex installed.

IMPORTANT NOTE:
Separate inner and outer fi rebox on E18 (see instructions in this

manual) Before installing outer fi rebox - lay on a fl at surface and
trim off 1-1/4" of each fi rebox fastening fl ange as shown below.