Regency Energy E18 Small Gas Insert - Manual (Page 31)

Regency ® E18 Gas Fireplace Insert
31
INSTALLATION
Diagram 9.1
Diagram 9.3
Diagram 9.4
Diagram 9.2
MODIFICATION OF FIRESONG 220N
1. Turn off and Disconnect Gas and Power.
2. Remove Valve Cover (See Diagram 9.1).
3. Remove the Bottom of the Firebox and Sand Pan in one assem-
bly (See Diagram 9.2).
4. Unscrew and Remove Front Inner Baffl e (See Diagram 9.3).
5. Cut the Sides of the Rear Inner Baffl e at the Back of the Firebox
(See Diagram 9.4).
6. Bend the Inner Rear Baffl e up so it is fl ush with the back of the
Firebox or cut off the Baffl e if it will not bend fl at with the back of
the Firebox.