Start-up – Sulky Vision Can WPB User Manual

Page 105

b) menu.

- 1 -

Select the menu.

- 2 -

Select the PAR/TOT menu.

- 3 -

Reset each counter to zero using the RAZ function

- 4 -

As soon as the alarm goes off and the bell is displayed on the screen, select

to find out the reasons.

- Select OK to return to the main screen.

- 5 -

Select

if you wish to save your work.

c) menu.

- 1 -

Select the menu.

- 2 -

Check: • that the fertiliser selected is correct,

• that the electric shutters are well closed,

• that your correction mode is correct (Dynamic or Static).

- 3 -

Select your application rate per hectare:

- use the numeric keypad directly, validate with

- 4 -

Go to spreading and select the Test or Auto correction.

- 5 -

Your spreading is DPA.

You can adjust your dose/hectare: select

then return to initial rate selecting

- 6 -

You may adjust either the right side selecting

or the left side selecting

- 7 -

You may enable the 3D Tribord.

otE

For using the automatic mode with the guidance bar, refer to the “Econov” quick start-up instructions.

Econov Version

a) menu

- 1 -

Select the menu.

- 2 -

Check that all the parameters have been saved correctly: speed sensor

and working width

- 3 -

Select your correction mode

- 4 -

Select TARE and set it to zero.

- 5 -

Select your fertiliser

otE

You can now fill the hopper of the fertiliser spreader.

105

Start-up