BT Diverse 1015 - Manual (Page 52)

To set your handset for manual base
selection
You can change automatic registration at a base
unit to manual registration. So if you are in an
area where the ranges of two base units overlap,
you can specify which base unit (and which
outgoing line) you prefer to use.
This setting is recommended where there is an
overlap between two or more base units.
The handset must be switched ON
• Press the STO button.
• Press the INT button. Display shows the
numbers of the base stations at which the
handset is registered.
• Press the number button – from 1 up to 4 –
for the base unit you want to select.
• Press the STO button to confirm.
49
Operating with additional
base unit
STO INT
If you move out of range of the displayed base unit,
and within range of another base unit during a call,
you will lose your current call.
If you are experiencing problems, please call the
Diverse Helpline on 0345 908070.