BT Diverse 1015 User Manual

Page 47

At the handset:

•

Press and hold down the

button together

with the

PWR

button until the display

shows

1–

and flashing

•

Enter the 4 digit system code. (Factory
setting is 0000. To change it see page16.)

•

Press the

button. The beeps stop after

about 10 seconds, and the display shows all
the available handset numbers.

•

Select and enter one of these numbers.
This is now the handset’s internal number
and it is registered with the base unit.

Up to six handsets can be registered and
operated from the Diverse 1015 base unit. The
system allows you to make internal intercom
calls between two handsets while a third is
making an external call.

Each additional handset you purchase must be
registered at the base unit.

To register a handset

The handset must be switched OFF.

At the base unit:

•

Press and hold down the green paging
button until you hear the continuous beeps
(after about 10-15 seconds).

You now have up to 1 minute to register the handset,
during which the beeps will continue.

PWR

Registering a new Diverse

handset with the base unit

Registering a new Diverse
handset with the base unit

Diverse handsets

Diverse additional handset - Item Code: 871038.
Diverse Executive handset - Item Code: 871073.
Diverse 1000 handset. Item Code: 870915.
Please note. Diverse 1000 handsets will

not work on Diverse 1010 and 1015

base units.