BT Diverse 1015 - Manual (Page 42)

Additional features
Using secrecy during an
external call
• To obtain secrecy on an external call, press
the
INT button. Display shows your handset’s
internal number and you hear the internal
dial tone. This allows you to talk to someone
in the same room, without your caller
hearing the conversation. Instead your caller
hears a melodious tone.
• Press the RCL button to resume your
telephone call with the external party.
Call timer
Your Diverse 1015 provides an approximate
guide to the length of each external call you
make. The handset display shows the
approximate call duration both during your call
and also for a few seconds after your call is
completed.
INT RCL
Operating with additional
handsets
‘Ring priority’ and ‘collective ringing’
Your Diverse 1015 will ring all handsets
whenever there is an incoming call. This is
called collective ringing. Ring priority means an
incoming call will ring first at a preferred
handset. If there is no answer, the call will ring
all other handsets.
The factory setting for your Diverse 1015 is for
collective ringing.
To change between ring priority and
collective ringing
The handset must be switched ON.
• Press the STO button.
• Press the # button.
• Press the 1 button.
• Enter the system code. (Factory setting is
0000. To change it see page 16.)
• Press the LNR button.
• Press the ✱ button.
• Press the 2 button and the 3 button. Display
shows the current setting.
• Press the 2 button to select RING PRIORITY
or
• Press the 1 button to select COLLECTIVE
RINGING.
• Press the STO button to confirm.
39
Additional features
Secrecy is not available for internal calls.