BT Diverse 1015 - Manual (Page 28)

25
Using your Diverse 1015
answering machine
To record your first outgoing message (A1)
• Press the MODE button until the voice says
‘Operation Mode. Call Recording after
announcement 1’. Display shows
A1 .
• Press the MODE button. Voice says ‘Mode’.
• Press the RECORD button within 3 seconds.
Your handset rings.
• Press the PHONE button on your handset
(only if handset is not on the base).
The voices says ‘Recording announcement’.
• Press the PHONE button to end the recording.
• Your recording is played back.
or if
• You are including a concluding message
press the
GREEN button on the base station
immediately after recording your outgoing
message.
or
• You may leave silence for approximately
4 seconds after recording your outgoing
message. The voice prompts you for the
concluding message and you may then
record your concluding message.
• Press the PHONE button to end the recording.
• Both your outgoing message and the
concluding message is played back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 8 VOLUME +
–
MODE
ON/OFF ANSWER
SKIP SKIP
DELETE STOP RECORD
PLAY
MODE
MODE
RECORD
To play back your first outgoing message (A1)
• Press the MODE button until the voice says
‘Operation Mode. Call Recording after
announcement 1’.
• Press the MODE button. Voice says ‘Mode’.
• Press the PLAY button. Your message is
played back. Along with any concluding
message.
• Stop playback at any time by pressing the
STOP button.
To delete your first outgoing message (A1)
• Press the MODE button until the voice says
‘Operation Mode. Call Recording after
announcement 1’. Display shows
A1 .
• Press the MODE button.
• Press and hold the DELETE button until the
outgoing message is deleted.
MODE
PLAY
DELETE