BT Diverse 1015 - Manual (Page 14)

Using your Diverse 1015
telephone
ON/OFF and PROTECTED modes
The handset can be operated in one of three
different modes.
OFF
Phone calls cannot be made and the handset
does not respond to incoming calls.
• To switch on, press and hold down the PWR
button until the display is activated.
ON
You can make and receive calls.
• To switch off, press and hold down the PWR
button until the display goes blank.
PROTECTED
This setting stops you accidentally operating
the handset’s keypad when carrying it around.
You can still receive incoming calls but cannot
make outgoing calls.
• To switch to PROTECTED when the handset
is ON, press and release the
PWR button
quickly.
• Flashing can also mean that the handset
is not registered with the base. To register a
new handset, see page 44.
If the handset is out of range of the base unit,
the
symbol f lashes. You cannot make or receive
calls until the handset is brought back within
range. The
symbol also f lashes for a while after
power-up until the handset automatically registers
to the base.
11
Using your
Diverse 1015