BT Diverse 1015 - Manual (Page 22)

To switch the battery warning tone on and off
You will hear a tone when the batteries need to
be recharged. If the batteries are already fully
charged, hearing the signal means they should
be replaced. You can turn this sound on and
off. The factory setting is ON.
• Press the STO button.
• Press 3 then 2 . Display shows the current
setting: I = ON, O = OFF .
• Press 1 to switch the tone ON
or
• Press 0 to switch the tone OFF.
• Press the STO button to confirm the new
setting.
To switch the ‘range warning’ tone on and off
If you are on a call as you reach the limit of
your handset’s range, you will hear a tone to
warn you that you will lose the call if you move
further away. You can turn this sound on and
off. The factory setting is ON.
• Press the STO button.
• Press 3 then 3 again. Display shows the
current setting: I = ON, O = OFF .
• Press 1 to switch the tone ON
or
• Press 0 to switch the tone OFF.
• Press the STO button to confirm the new
setting.
STO
3 DEF 2 ABC
STO
3 DEF 3 DEF
To switch the ‘wrong button’ tone on and off
When you are following a set-sequence
instruction, your Diverse handset will give a
warning if you press the wrong button in the
sequence. You can turn this sound on and off.
The factory setting is ON.
• Press the STO button.
• Press 3 then 4 . Display shows the current
setting: I = ON, O = OFF .
• Press 1 to switch the tone ON
or
• Press 0 to switch the tone OFF.
• Press the STO button to confirm the new
setting.
To switch the ‘settings confirmation’ tone
on and off
You will hear a confirmation tone each time
you successfully complete a setting. You can
turn this sound on and off. The factory setting
is ON.
• Press the STO button.
• Press 3 then 7 . Display shows the current
setting: I = ON, O = OFF .
• Press 1 to switch the tone ON
or
• Press 0 to switch the tone OFF.
• Press the STO button to confirm the new
setting.
19
STO
3 DEF 7 PQRS
STO
3 DEF 4 GHI
Using your
Diverse 1015