Skyjacker RWM101 - Manual (Page 2)

Pg 2
3. Install the new Skyjacker upper crush sleeves (Part # CS2875) between each rear frame rail &
install the new Skyjacker rear winch mount using the supplied 3/8" x 4 1/2" bolts, washers, nuts, &
a 9/16" socket. (See Photo # 1)
4. Mark, center punch, & drill the new lower mounting locations for the new Skyjacker rear winch
mount using a 3/8” drill bit.
5. Once drilled, finish installing the new Skyjacker rear winch mount to the vehicle using the supplied
3/8" x 1 1/4" bolts, washers, nuts, & a 9/16" socket. (See Photo # 1)
6. Unblock the front & rear tires / wheels, & release the emergency brake.
FINAl NoTes:
• After the installation is complete, double check that all nuts & bolts are tight.
• Retorque all the bolts after the first 100 miles.
• The exhaust may discolor the powder coat of the rear winch mount. This is not a fire hazard & will
not affect the functionality of this rear winch mount.
seat Belts save lives, Please Wear Your seat Belt.
I-RWM101
3/8" x 4 1/2"
3/8" x 1 1/4"
3/8" x 4 1/2"
3/8" x 1 1/4"
Cs2875
Cs2875
Photo # 1