SATEC EM720 Operation Manual - Manual (Page 95)

Chapter 5 Configuring the EM720
Configuring Billing/TOU
EM720 Power Quality and Revenue Meter 95
Parameter Options Default Description
Channel No, Ch1-Ch6 None Defines a measurement channel for multi-
meter energy metering. Not used for a
single self-metering channel if there are no
external sources. Set to Ch1 for internal
energy sources, and to Ch2 through Ch6 for
external sources in the event of multi-
channel energy metering.
Register Source List
Source
Input None
kWh IMPORT
KWh EXPORT
kvarh IMPORT
kvarh EXPORT
kvarh Q1
kvarh Q2
kvarh Q3
kvarh Q4
kVAh TOTAL
kVAh IMPORT
kVAh EXPORT
DI1-DI8 None Links an internal or external energy source
to the billing register.
Multiplier 0.001 to 100.000 1.000 The multiplication factor for the energy
source. Not effective for internal sources.
Target Reg#1- Reg#10 None Defines the target billing register for the
energy source. It is set automatically.
Configuring the Daily Tariff Schedule
To configure your daily tariff schedule, select Energy/TOU
from the Meter Setup menu, and then click on the TOU Daily
Profiles tab.