Clearing device diagnostics, Resetting accumulators and log files, Viewing and clearing device diagnostics – SATEC EM720 Operation Manual User Manual
Page 130: Resetting accumulators and clearing, Log files, In chapter 6 f, Clearing device, Diagnostics, Resetting accumulators and clearing log files, In chapter 6
Chapter 6 Device Control and Upgrading
Clearing Device Diagnostics
130
EM720 Power Quality and Revenue Meter
Clearing Device Diagnostics
Using the Front Display
See the following section
Resetting Accumulators and Log
on how to clear the device diagnostics from the front
display.
Using PAS
Via PAS, you can both examine the present device
diagnostics status, and clear it.
To enter the Device Diagnostics dialog, select Device Control
from the Monitor menu, and then click on the Device
Diagnostics tab.
To clear the device diagnostics events, click on Clear.
Refer to
in Appendix G for the list of
diagnostic codes and their meanings.
You can also clear the device diagnostics via the Clear
Operation/Event Counters entry in the Reset dialog (see the
following section).
Resetting Accumulators and Log Files
Using the Front Display
Select Reset from the main menu. See
in Chapter 3 for information on navigating in
menus.