SATEC EM720 Operation Manual - Manual (Page 132)

Chapter 6 Device Control and Upgrading
Remote Relay Control
132 EM720 Power Quality and Revenue Meter
To reset the accumulation counters or to clear a file:
1. Click on the corresponding button.
If a reset entry has more than one target, you are
allowed to select targets from the dialog box.
2. Check the corresponding boxes, and then click OK.
3. Confirm your command to send it to the meter.
Remote Relay Control
From PAS, you can send a command to any relay in your
meter or to release a latched relay, except of the relays that
are linked to the internal pulse sources. Such relays cannot
be operated outside of the device.