SATEC EM720 Operation Manual - Manual (Page 127)

Chapter 5 Configuring the EM720
Configuring Meter Passwords
EM720 Power Quality and Revenue Meter 127
Configuring Meter Passwords
Using the Front Display
Select Access from the main menu. You should have
administration rights to enter this menu. See
Viewing and
Changing Setup Options in Chapter 3 for information on
navigating in menus.
The setup menu allows you to configure three passwords for
three security levels the meter provides.
To setup the meter passwords:
1. Use the SCROLL button to scroll through the
passwords.
2. Press briefly SELECT/ENTER button to highlight the
password window.
3. Enter the new password as you enter numerical
values.
4. Press the SELECT/ENTER button for more than 1
second to save your new setting.
5. Setup the remaining passwords and save them to the
meter.
Using PAS
PAS allows you to prepare and save the passwords in the
meter site database and then download them at once to your
meter or to multiple meters, or you can change any password
individually online.
To configure passwords offline or to update them all together,
select Administration Setup from the Meter Setup menu.
The present passwords settings are never uploaded from the
meter via the Passwords setup. When you open the dialog, all
passwords are zeroed.
To setup new passwords:
1. Enter the first (lower-level) password in the “Password
1” box and repeat it in the following “Confirm
password” box.
2. In the same manner, enter Password 2 and Password
3 for the medium and high-level security passwords.
3. Click “Save as” to save the passwords to the site
database. The passwords are stored in an encrypted
form.
4. Click “Send” to update passwords in your meter.