PIAA 2000 Series - Manual (Page 4)

-4-
PKI-0004
【1】Preparation for Installation
The entire face of the double
-sided tape can be placed on
a flat surface.
Apply double-sided tape.
Where should it be installed?
Procedure for
fixing in place
If there is not enough
adhesive space. If adequate adhesive
space cannot be secured.
Use double-sided tape or screw to
fix in place.
Mounting that combines bracket and lamp
Type B Type A
75 mm
88 mm
56 mm
4mm
Using the holes in the lamp bracket, the height
from the lamp body to the installation surface
can be adjusted. Depending on the top and
bottom measurements as well as shape.
Point !
Mid-section of lamp
Bracket position
Top/Bottom can be adjusted
75 mm
52 mm