PIAA 004 Series - Manual

Thank you very much for purchasing PIAA product.
Please read this entire manual before installation and use of this product.
Installation Instructions
004
Please give this Installation Manual to customer after installing.
For Installers
• Lighting laws vary state to state, check your
local laws before use.
• The lamps get very hot when they have been in use.
Do not touch them as they may cause burns.
• After the lights have been on do not place them near
flammable objects.
• Do not splash water directly on the hot lamps, as this may cause cracking of the
lens due to dramatic change in temperature.
• Do not look directly into the light of the lamps as the bright light may
cause eye damage.
• This light system may be used only as high beam auxiliary lighting.
• The lamps and relay harness are to be used only with 12 volt automotive
electrical systems.
• Using this light system while the engine is not running will drain the battery.
• Do not repeatedly turn the light system on and off as it will shorten the life
of the system.
• Some automobiles generate high voltage at start up and when it is turned off,
do not have lights on as you start or turn off your vehicle.
• Using the wrong bulbs may cause a malfunction, use only specified PIAA bulbs.
• When changing bulbs or lenses follow the lamp assembly/disassembly diagram.
• Leave at least 1/8” clearance between the lamps and the front spoiler,
as the heat may damage the spoiler.