PIAA 1500 Back-Up - Manual

Thank you very much for purchasing PIAA product.
Please read this entire manual before installation and use of this product.
Installation Instructions
1500 Back-Up
• Lighting laws vary state to state, check your local laws before use.
• Do not submerge lamps in water. The dramatic change in temperature may
cause the glass lens to crack. The lamps are not water tight, they will fill
with water if submerged.
• The lamps and relay harness are to be used only with 12 volt automotive
electrical systems.
• Using this light system while the engine is not running will drain the battery.
• Do not repeatedly turn the light system on and off as it will shorten the life
of the system.
• Some automobiles generate high voltage at start up and when it is turned off,
do not have lights on as you start or turn off your vehicle.
• Using the wrong bulbs may cause a malfunction, use only specified PIAA bulbs.
• When changing bulbs or lenses follow the lamp assembly/disassembly diagram.
• Leave at least 1/8” clearance between the lamps and the front spoiler,
as the heat may damage the spoiler.