PIAA RS800 H.I.D. Shock Lamp - Manual

Thank you very much for purchasing PIAA product.
Please read this entire manual before installation and use of this product.
Installation Instructions
Shock Lamp RS800 H.I.D.
Please give this Installation Manual to customer after installing.
For Installers
• Lighting laws vary state to state, check your
• When installing two lamps on vehicle it is necessary to purchase another rely
harness PN 34035 - one harness is required for each lamp.
local laws before use.
• The lamps get very hot when they have been in use.
Do not touch them as they may cause burns.
• After the lights have been on do not place them near
flammable objects.
• Do not splash water directly on the hot lamps, as this may cause cracking of the
lens due to dramatic change in temperature.
• To avoid potential damage to your eyes do not look directly into the lamp.
• This product is designed for 12v automotive electrical systems only.
• Using this light system while the engine is not running will drain the battery.
• Do not repeatedly turn the light system on and off as it will shorten the life
of the system.
• To avoid potential damage to your lights make sure your lights are turned off prior
to starting or shutting off your vehicle.
• Using the wrong bulbs may cause a malfunction, use only specified PIAA bulbs.
• When changing bulbs or lenses follow the lamp assembly/disassembly diagram.
P0712 RS800 Manual (2)