PIAA Bulb - Manual

Thank you very much for purchasing PIAA product.
Please read these instructions before installation
and use of this product.
• Installation of this bulb is simple, just reverse the steps you took to
remove your old bulbs.
• Before installation make sure that your lamps and wiring harness are
compatible with this bulb.
Things to check prior to installation:
1. Lamp must take the same style bulb as the one you are
attempting to install.
2. Lamp must be able to dissipate the heat created by this
upgrade. * Higher wattage bulbs will generate more heat.
3. The bulb seat must be clean.
4. The connector that plugs into the bulb must be clean.
5. The harness cannot be damaged.
6. If you are installing a higher wattage bulb you must check to
see if the relay harness is capable of the extra amperage.
If any of the above listed are not checked and fixed this bulb will not
perform and if they are not fixable you cannot use this bulb
Bulb Instruction Manual