PIAA Deno 6 Daytime Running Lamp - Manual

-1-
PLI-1165
Deno Series LED LAMP Manual
Deno Series LED LAMP
Deno2 Deno6
Thank you very much for purchasing PIAA product.
Read this instruction manual thoroughly for proper use of the
product.After completing your installation, please keep this
manual for future reference.
※ The and marks indicated in this manual are
cautionary points related to the installation of the product.
To ensure safe and secure installation of the product, please follow these points closely.
To user … When giving this product to a third party, always include this manual
together with the product.
To shop owners installing the product … After installation of the product, make sure the customer is provided
with this owner s manual.
Please read the cautionary points before installation to ensure safe utilization of the product.
● Do not touch the bulb while lit or immediately after switching it off because the lamp remains extremely hot. Severe burns
may occur as a result.
● Do not look directly into the light for long periods. Doing so may cause eye irritation or visual impairment.
● Make sure the lamp is installed securely before driving the vehicle. If an abnormality is found, adjust it immediately.
● Check for any loose screws that hold the lamp in place before driving. If you find any loose screws or bolts (if a bracket is
used), tighten them securely.
● Avoid needless disassembly of lamp or harness as it may cause it to fail.
● If the lens is cracked or damaged in any way, verify whether there is any damage to the harness or the relay harness that
it is connected to. If there is any damage to the cord covering, replace it immediately.
● When washing the vehicle with a hose, do not apply excess water pressure to the lamp. Water may seep in and caues
damage to the lamp.
● When the vehicle is stationary, air does not blow against the lamp, causing heat to build up. Therefore, if stopped for
extended periods of time, turn off the lights.
● This Instruction Manual (IM) refers to the Deno2 system but can also be applied to the Deno6 system.