PIAA 2000 Series - Manual

-1-
PKI-0004
2000 Series Owner s Manual
Thank you for purchasing PIAA product.
To ensure the product functions properly please read the manual thoroughly.
Keep the Owner s manual in a safe place for easy reference.
Please read the cautionary points before installation to ensure safe utilization of the product.
● The lamp and relay harness are intended for automobile use. Do not use for any other purpose.
● This lamp is intended for use in rain (day or night), during foggy or snowy conditions where visibility is hampered. Do not use
during normal driving conditions.
● Do not operate the switch while driving.
● If the lamp is kept on when the engine is not running, it may drain the battery.
● Make sure the lamp is installed securely before driving the vehicle. If an abnormality is found, adjust it immediately.
● Check for any loose screws that hold the lamp in place before driving. If you find any loose screws or bolts (if a bracket is
used), tighten them securely. If you notice a loose part while driving, inspect the section immediately and make the necessary
adjustments.
● Avoid repeatedly turning the lamp off and on as it may reduce the overall life of the bulb.
● Depending on the model of the vehicle, a surge of high voltage may occur when starting the engine. In order to protect the
bulb, avoid starting the engine with the lamp on or turning it on immediately after.
● Using bulbs with different specifications may cause an abnormality. When replacing bulbs, confirm the voltage, watt and type.
We recommend using PIAA-approved bulbs. Refer to 【6】Bulb Replacement Procedures when replacing bulbs.
● Avoid needless disassembly of lamp or relay harness as it may cause it to fail.
● If the lamp and/or relay harness is removed and set aside for safekeeping, wipe away all dust or grime and store in an place
free of moisture.
● If a lens cracks, refer to 【6】Bulb Replacement Procedures then disassemble the lamp and replace accordingly.
※ The and marks indicated in this manual are
cautionary points related to the installation of the product.
To ensure safe and secure installation of the product, please follow these points closely.
To user … When giving this product to a third party, always include this manual
together with the product.
To shop owners installing the product … After installation of the product, make sure the customer is provided
with this owner s manual.
● Do not touch the bulb while lit or immediately after switching it off because the lamp remains extremely hot. Severe burns may
occur as a result. Also, care should be taken to prevent water from making contact with the lens.This may cause the lens to
crack or impair proper functioning.
● The lamp becomes very hot when turned on. When parking your car near flammable items such as dried leaves, turn off the
lamp as it may cause a fire.
● Do not look directly into the light for long periods. Doing so may cause eye irritation or visual impairment.