Omnitron Systems Technology iConverter GX/TM2 - Manual

iConverter iConverter
®
■ Carrier-Grade optical Ethernet Network Interface Device
■ Integrated SNMPv1, SNMPv2c, SNMPv3 and IP-less
802.3ah management
■ 802.3ah Link OAM for early fault detection and
performance monitoring
■ VLAN with 802.1ad Q-in-Q for E-Line and E-LAN
services
■ Quality of Service for Voice/Data/Video over Ethernet
■ Bandwidth control (rate limiting) with 64Kb increments
■ Port MIB statistics and optical performance statistics to
support Service Level Agreements
■ Port Access Control for enhanced security
■ 10,240 byte Jumbo frames
■ Layer 2 Control Protocol (L2CP) Policy Control
■ Configurable Link Fault Propagation modes
■ Small Form Pluggable (SFP) transceivers with Optical
Statistics for standard or CWDM applications
■ Fixed-fiber connectors available for multimode and
single-mode dual fiber and single-mode single-fiber
■ UTP auto-crossover and auto-negotiation of data
rate, duplex modes and pause capabilities
■ Commercial (0 to 50 O C), wide (-40 O to 60 O C) and
extended (-40 O to 75 O C) temperature ranges
■ MEF 9 and 14 Certified Compliant
■ NEBS Level 3 Compliant
■ Lifetime Warranty and free 24/7 Technical Support
iConverter
GX/TM2
10/100/1000BASE-T UTP to 1000BASE-X Media Converter and Network Interface Device
The iConverter GX/TM2 conforms to the Ethernet in the
First Mile (EFM) fiber standards to support Fiber-to-the-X
Metropolitan and Enterprise LAN networks. The GX/TM2
provides intelligent, securely managed service demarcation
at the customer premises, offering Quality of Service and
enhanced Bandwidth Control (rate-limiting) capabilities.
The GX/TM2 features built-in Operations, Administration
and Maintenance (OAM) with comprehensive performance
monitoring, fault detection and provisioning.
The GX/TM2 is available as a compact standalone unit or as
a chassis plug-in module. The hot-swappable GX/TM2 plug-in
module can be mounted in a 19 or 5-Module chassis with any
combination of redundant AC and DC power supplies. It can
also be mounted in a 2-Module AC or DC powered chassis, or
in a 1-Module chassis with AC or DC power input.
The plug-in module can manage other modules in the same
chassis and operate as a managed 10/100/1000 media
converter. It features two Gigabit Ethernet backplane ports
for connectivity to adjacent modules in a chassis for multi-port
and multi-service configurations.
The standalone GX/TM2 is available as a tabletop or wall-
mount unit. The tabletop model can be DIN-rail mounted using
an optional DIN-rail mounting kit. Both the tabletop and the
wall-mount models are DC powered and are available with an
external AC/DC power adapter or a terminal connector for DC
power. The GX/TM2 standalone unit combines management
capability with a compact chassis for deployment at the
demarcation point.
KEY FEATURES
CARRIER-GRADE OPTICAL ETHERNET
iConverter fiber access Network Interface
Devices and media converters are MEF
9 and 14 certified compliant and NEBS
Level 3 compliant. iConverter NIDs enable
Carrier-Grade Optical Ethernet with reliability
and performance monitoring to support Service
Level Agreements (SLAs).
The modular design of iConverter fiber access
equipment future-proofs Metro Ethernet
services with scalability of network services
and lowers operating costs with comprehensive
OAM management and provisioning.