MTS Acumen Electrodynamic Test System Load Frame User Guide - Manual (Page 64)

Annually Monthly Daily Calendar Time Using 8 Hours Running
Time Rate per Day
MTS Verify Load Frame Protection Limits
Correct And Enabled
Warning:
Be careful not to spill cleaning liquid on the frame.
Cleaning solution can cause damage or injury.
To avoid hazardous conditions, always follow the manufacturers’ recommendations and cautions.
Caution:
Observe all manufacturer recommendations and cautions when using any cleaning solution.
Cleaning solution can cause damage or injury.
To avoid hazardous conditions, always follow the manufacturers’ recommendations and cautions.
General Cleaning
Clean the frame as often as needed. Use a damp, lint-free rag to clean the side covers, base, and crosshead.
If necessary, mild detergent or cleaning fluid can be used.
Monthly Maintenance
Verify that the Emergency Stop button is functioning properly.
Verify any additional interlocks are functioning properly (for example, the interlock switches on the door of a
test area enclosure).
Other Service
Regular inspection and service of the drive motor system and crosshead positioning components are needed
to prolong the life of your frame and keep it performing optimally. This type of service is preformed by MTS
field service engineers or an MTS authorized service representative. Contact your MTS authorized
representative for additional information.
64 MTS Acumen™ Electrodynamic Test System
Maintenance