MTS Acumen Electrodynamic Test System Load Frame User Guide - Manual (Page 62)

Routine Maintenance Overview Checklist
Important:
There are no customer serviceable components on the MTS Acumen frames. Maintenance consists
of keeping the frame and work area clean, general inspection, checking interlocks, and scheduled
frame calibration.
Recommended Service
Annually Monthly Daily Calendar Time Using 8 Hours Running
Time Rate per Day
2000 160 8 Running Time-Hours
X Clean work area / Machine Surfaces
X Check Frame Mounted Control Emergency
Stop
X Check Remote Emergency Stop (If
Present)
X Check Test Area Enclosure - Open Door
Applies Low Velocity
Load Frame / Crosshead
MTS Check Crosshead Locks For Proper
Operation
MTS Check Crosshead Lift Belt For Wear
MTS Check / Adjust Crosshead Lift Belt Tension
MTS Check / Clean Crosshead Lift Screws
MTS Check / Clean Columns
MTS Assure Crosshead Movement Is Smooth
Actuator
MTS Check Cooling System Is Operational
MTS Clean Exposed Cooling Surfaces
MTS Assure Actuator Movement Is Smooth
MTS Check Actuator Guidance Mechanism
MTS Check Brake Operation
62 MTS Acumen™ Electrodynamic Test System
Maintenance