MTS Acumen Electrodynamic Test System Load Frame User Guide - Manual (Page 44)

Dimension Item
M6 X 1.0 mm -6H 11.98 mm deep (0.472 deep) Four places J
31.41 mm (1.237 in) Two places K
62.86 mm (2.475 in) Two places L
Loadcell Fixture Mounting Dimensions
This section defines the loadcell's fixturing interface. The system loadcell can be mounted to either the
baseplate, or the crosshead. The graphic in this section and the sections above show the loadcell mounted
to the crosshead.
Loadcell Fixture Mounting Dimensions
Dimension Item
16.012 mm +0.0254 mm -.00000 mm (0.6304 in +0.0010 -0.0000 in) A
1.54 mm (0.060 in) x 45° B
R. 0.76 mm (R. 0.030 in) Maximum C
11.98 mm (.472 in) Thread depth D
18.33 mm (0.722 in) Total depth E
6.35 mm (0.250 in) F
M6 X 1.0 mm -6H 11.98 mm deep (0.472 in deep) G
25.14 mm (0.99 in) H
Keep fixturing below this line I
3.81 mm (0.15 in) J
44 MTS Acumen™ Electrodynamic Test System
Installation