Mk-1600 maintenance – MK Diamond MK-1600 Series User Manual
Page 30
30
(J)
Clean and verify the alignment
of the Engine and Blade Shaft
Pulleys.
MK-1600 MAINTENANCE
(K)
Install new belts onto the Engine
Blade Shaft Pulleys.
(L)
Verify the belts are seated in all
grooves of the Engine and Blade
Shaft Pulleys.
(N)
Check belt for proper tension
(Proper tension is approxi-
mately 1/8-inch deflection of the
belt).
(P)
Tighten the Engine Mounting
Bolts.
(Q)
Install the Belt Guard and Belt
Guard Retaining Bolts.
(R)
Install the Blade (See Blade
Installation section).
(O)
Repeat Steps L and M until
proper tension is achieved.
(M)
Tighten the Engine Tension Arm
Nuts.
See also other documents in the category MK Diamond Power saws:
- MK-770 (41 pages)
- MK-770 EXP (46 pages)
- MK-660 (44 pages)
- MK-470 (12 pages)
- MK-377 (36 pages)
- MK-370 (36 pages)
- MK-370 EXP (52 pages)
- MK-170 (36 pages)
- MK-145 (32 pages)
- MK-145 220 Volt (32 pages)
- MK-101 (52 pages)
- MK-101 (56 pages)
- MK-101-24 (52 pages)
- MK-101-24 (56 pages)
- MK-101 Pro / Pro24 (56 pages)
- MK-101 Tracker (45 pages)
- MK-101Pro24 JCS (60 pages)
- MK-101 JCS Rental (51 pages)
- MK-101 Lowes (56 pages)
- MK-101 Lowes (52 pages)
- MK-100 (44 pages)
- MK-100 (52 pages)
- MK-100 Tracker (46 pages)
- MK-100 JCS (49 pages)
- TX-3 (52 pages)
- Saw Tent (2 pages)
- MK-112 (28 pages)
- MK-1070 (22 pages)
- MK-212 (52 pages)
- MK-1590 (36 pages)
- MKDX Profile Milling Machine (40 pages)
- MK-EZ Profile Milling Machine (36 pages)
- MK-1503SS (24 pages)
- MK-1080 (44 pages)
- MK-1080 (1 page)
- MK-1080 (3 pages)
- MK-1280 Gas Saw (48 pages)
- MK-1280 Electric Saw (40 pages)
- MK-1280 Rolling Cart (4 pages)
- MK-1270 (Shindaiwa) (28 pages)
- MK-2000 Electric Saws (52 pages)
- MK-2000 Gas (60 pages)
- MK-5005S (56 pages)
- MK-5000 Gas Saws (56 pages)
- BX-3 (36 pages)