MK Diamond MK-1600 Series - Manual (Page 12)

12
UNPACKING
MK-1600
Saw
Blade Nut
Wrench
Engine Manual Warranty
Card
MK-1600
Owner’s Manual
Pointer
Handlebar
Bolts and Washers
Handlebar
MK-1600 UNPACKING
12.2010
MK-1600
OWNER’S MANUAL &
OPERATING INSTRUCTIONS
www.mkdiamond.com
Caution: Read all safety and operating instructions before using this equipment. This owner’s manual MUST accompany the equipment at all times.
Revision 200
Manual Part# 157841
Gas Powered
Concrete Saw
Your saw has been shipped from the factory thoroughly inspected. Only minimal assembly and
service is required. Check each, item, making certain all items are accounted for and in good visual
condition before discarding any packing materials. If there are any missing or damaged parts call MK
Diamond Customer Service at 800-421-5830.
CONTENTS
In the containers, you will find one (1) MK-1600 Saw, one (1) Blade Nut Wrench, one (1) Handlebar,
two (2) Handlebar Bolts and Washers, one (1) Pointer, one (1) MK-1600 Owner’s Manual, one (1)
Engine Owners Manual, one (1) Warranty Card.
WARNING Never start engine until all initial servicing and set up steps are completed accord-
ing to this operations manual and engine manual. Read and familiarize yourself
with all controls and features of the saw before beginning operations.
Remove the saw from the pallet and place it on a flat surface. Two people are required to lift saw.