MK Diamond MK-1600 Series - Manual (Page 27)

27
MK-1600 MAINTENANCE
Checking Oil Level
When installing the Oil Dipstick, ensure the threads
are aligned with the threads of the Oil Reservoir so
as not to “cross-thread.”
(A)
Verify the Engine is upright and
level. Refer to Engine Manual
for details.
NOTE:
Engine Maintenance
(A)
Remove the Diamond Blade.
See Blade removal section.
(B)
Lower the MK-1600 to its
lowest position.
(C)
Free the Oil Drain Line.
Place a catch basin below the
Oil Drain Line. Remove the Drain
Cap to drain oil completely. Refer
to Engine Manual for details.
Engine maintenance and adjustment is necessary to keep the saw in good operation condition. Main-
tenace operations include oil changes, filter changes, air cleaner, spark plug, fuel filter etc...Perform
all maintenance procedures as recommended by the Honda, Kohler or Subaru engine manual pro-
vided separately.
Engine Air Filter Inspection Cleaning and Replacement
(A)
Clean the Air Filter. Refer to
Engine Manual for details.