Mk-1600 maintenance – MK Diamond MK-1600 Series User Manual
Page 25

25
MK-1600 MAINTENANCE
(D)
Clean engine Air Filter weekly
and replace monthly. Refer to
Engine Manual for details.
(E)
Clean Spark Plug Weekly and
readjust Spark Plug monthly.
Refer to Engine Manual for
details.
(F)
Clean and lubricate the Blade
Shaft.
(G)
Clean and lubricate the Blade
Retaining Bolt.
500 Hours and 1000 Hour Maintenance
Perform the following maintenance every 500 hours.
(A)
Replace Spark Plug. Refer to
Engine Manual for details.
(B)
Have Authorized Repair Shop
perform 500-hour
maintenance.
(C)
Have Authorized Repair Shop
perform 1000-hour maintenance.
Definitive information on engine maintenance is
contained in the engine manual provided sepa-
rately. Perform all maintenance procedures as
recommended by the engine manual.
NOTE:
See also other documents in the category MK Diamond Power saws:
- MK-770 (41 pages)
- MK-770 EXP (46 pages)
- MK-660 (44 pages)
- MK-470 (12 pages)
- MK-377 (36 pages)
- MK-370 (36 pages)
- MK-370 EXP (52 pages)
- MK-170 (36 pages)
- MK-145 (32 pages)
- MK-145 220 Volt (32 pages)
- MK-101 (52 pages)
- MK-101 (56 pages)
- MK-101-24 (52 pages)
- MK-101-24 (56 pages)
- MK-101 Pro / Pro24 (56 pages)
- MK-101 Tracker (45 pages)
- MK-101Pro24 JCS (60 pages)
- MK-101 JCS Rental (51 pages)
- MK-101 Lowes (56 pages)
- MK-101 Lowes (52 pages)
- MK-100 (44 pages)
- MK-100 (52 pages)
- MK-100 Tracker (46 pages)
- MK-100 JCS (49 pages)
- TX-3 (52 pages)
- Saw Tent (2 pages)
- MK-112 (28 pages)
- MK-1070 (22 pages)
- MK-212 (52 pages)
- MK-1590 (36 pages)
- MKDX Profile Milling Machine (40 pages)
- MK-EZ Profile Milling Machine (36 pages)
- MK-1503SS (24 pages)
- MK-1080 (44 pages)
- MK-1080 (1 page)
- MK-1080 (3 pages)
- MK-1280 Gas Saw (48 pages)
- MK-1280 Electric Saw (40 pages)
- MK-1280 Rolling Cart (4 pages)
- MK-1270 (Shindaiwa) (28 pages)
- MK-2000 Electric Saws (52 pages)
- MK-2000 Gas (60 pages)
- MK-5005S (56 pages)
- MK-5000 Gas Saws (56 pages)
- BX-3 (36 pages)