Mk-1600 maintenance – MK Diamond MK-1600 Series User Manual
Page 23

23
(J)
Install the Blade Shaft Cover.
• Always turn the master engine switch to the off position.
• NEVER lubricate components or attempt service on a running machine.
• Keep the machinery in proper running condition.
• Fix damage to the machine immediately and always replace broken parts, or missing decals.
MK-1600 MAINTENANCE
New Maintenance
Perform the following after initial purchase and operation of the saw.
(A)
Change engine oil after
first month or first 20 operating
hours (See Engine Manual).
(B)
Check and adjust tension on
all belts following first
48 hours of operation
(See Belt section).
MAINTENANCE SAFETY
(K)
Remove the Pointer.
(L)
Install the Pointer on the oppo-
site side, next to Blade Guard.
(M)
Verify the stop Clip is installed as
shown.
See also other documents in the category MK Diamond Power saws:
- MK-770 (41 pages)
- MK-770 EXP (46 pages)
- MK-660 (44 pages)
- MK-470 (12 pages)
- MK-377 (36 pages)
- MK-370 (36 pages)
- MK-370 EXP (52 pages)
- MK-170 (36 pages)
- MK-145 (32 pages)
- MK-145 220 Volt (32 pages)
- MK-101 (52 pages)
- MK-101 (56 pages)
- MK-101-24 (52 pages)
- MK-101-24 (56 pages)
- MK-101 Pro / Pro24 (56 pages)
- MK-101 Tracker (45 pages)
- MK-101Pro24 JCS (60 pages)
- MK-101 JCS Rental (51 pages)
- MK-101 Lowes (56 pages)
- MK-101 Lowes (52 pages)
- MK-100 (44 pages)
- MK-100 (52 pages)
- MK-100 Tracker (46 pages)
- MK-100 JCS (49 pages)
- TX-3 (52 pages)
- Saw Tent (2 pages)
- MK-112 (28 pages)
- MK-1070 (22 pages)
- MK-212 (52 pages)
- MK-1590 (36 pages)
- MKDX Profile Milling Machine (40 pages)
- MK-EZ Profile Milling Machine (36 pages)
- MK-1503SS (24 pages)
- MK-1080 (44 pages)
- MK-1080 (1 page)
- MK-1080 (3 pages)
- MK-1280 Gas Saw (48 pages)
- MK-1280 Electric Saw (40 pages)
- MK-1280 Rolling Cart (4 pages)
- MK-1270 (Shindaiwa) (28 pages)
- MK-2000 Electric Saws (52 pages)
- MK-2000 Gas (60 pages)
- MK-5005S (56 pages)
- MK-5000 Gas Saws (56 pages)
- BX-3 (36 pages)