Lenze EMF2112IB - Manual (Page 48)

Appendix
8-2 BA2112EN
8.2 List of abbreviations
Abbreviation Meaning
AIF Automation Interface; interface between controller and automation or fieldbus modules. It also includes defined process data.
bin Display of values in the binary character format (0,1).
Ctrl. enable Controller enable
Ctrl. inhibit Controller inhibit
DCB DC-injection brake
EMC Electromagnetic Compatibility
hex Display of values in the hexadecimal character format (0, ¡, 9, A, B, ¡, F ).
Imax Current limit
IMP Pulse inhibit
JOG Fixed speed or input for activation of the fixed speed
LSB Least Significant Bit; low-weighting bits of a binary value
PCD Process data
PCP Peripherials Communication Protocol
PE Protective earth
PI-data Process-input data
PIWx Process-input word x from PROFIBUS: Reference point is the master, i.e. a word is transmitted from the controller to the master. “x“
characterizes the word address (starts with x = 1).
PO-data Process-output data
POWx Process-output word x to PROFIBUS: Reference point is the master; i.e. a word is transmitted from the master to the controller. “x“
characterizes the word address (starts with x = 1).
QSP Quick stop
RFG Ramp-function generator; setpoint integrator
TRIP Operation fault
Vcc Controlled constant voltage supply
Show/Hide Bookmarks