3 foreseeable misuse, 4 residual hazards, Foreseeable misuse – Lenze MDFQA Operating Instructions User Manual
Page 10: Residual hazards, Safety instructions

Safety instructions
Foreseeable misuse
EN
10
Lenze ¯ BA 33.0006 ¯ 3.0
2.3
Foreseeable misuse
¯
Do not operate the motors
–
... in explosion−protected areas
–
... in aggressive environments (acid, gas, vapour, dust, oil)
–
... in water
–
... in radiation environments
)
Note!
Increased surface and corrosion protection can be achieved by using
adapted coating systems.
2.4
Residual hazards
Protection of persons
¯
The motor surfaces can become very hot. Danger of burns when touching!
–
Provide protection against accidental contact, if necessary.
¯
Highfrequency voltages can be capacitively transferred to the motor housing
through the inverter supply.
–
Earth motor housing carefully.
¯
Danger of unintentional starting or electrical shocks
–
Connections must only be made when the equipment is deenergised and the
motor is at standstill.
–
Installed brakes are no fail−safe brakes.