Landoll 9650 Field Cultivator - Manual (Page 74)

4-8 F-605-0313 Edition
OPERATION AND MAINTENANCE
Depth Stop Adjustment
1. The operating depth of the Field Cultivator is
controlled by a single-point depth stop. The stop is
located at the center front of the machine (See
Figure 4-9.)
2. Adjust the depth stop by turning the handle out
(counter-clockwise) to increase operating depth.
Turn the handle in (clockwise) to decrease operating
depth. One turn will equal approximately 3/16”
adjustment in depth. The gauge on the side of the
depth stop tube gives a reference for depth setting.
The “A “setting refers to maximum operating depth.
IMPORTANT
For maximum operating depth, the lift wheels must
be in contact with the ground and carry some of the
machine weight. Raising the lift wheels off the
ground, permits uncontrolled depth of each frame
section and does not allow the self-leveler to
function properly.
Figure 4-9: Depth Stop Adjustment
DEPTH STOP
TUBE
DEPTH STOP
GAUGE
DEPTH STOP
HANDLE
9650 depth stop adjust