Landoll 9650 Field Cultivator - Manual (Page 61)

ASSEMBLY INSTRUCTIONS
3-21
5 Row Spike Harrow Installation
See Figures 2-15 thru 2-22 for 5 Row Spike Harrow
placement dimensions.
1. Attach spike harrow arm assemblies and spike
harrow arm clamp to rear frame using 3/4-10 x 8-1/2
hex head cap screws and hex lock nuts.
2. Attach pull chain bracket to spike harrow arm clamp
using 3/4-10 x 5 hex head cap screws and hex lock
nuts.
3. Attach spike bars to spike harrow arm assemblies
per placement drawings using bar clamps or bar
clamps w/ tabs, 1/2-13 x 4-1/2 hex head cap screws,
1/2-13 x 1-1/4 hex head cap screws, and hex lock
nuts.
NOTE
See Figures 2-15 thru 2-22 for 5 Row Spike Harrow
placement dimensions of spike harrow arms, spike bars,
and usage of bar clamps or bar clamps w/ tabs.
NOTE
The harrow arms with catch tray hooks are used on the
outer wings with the catch tray hooks toward the outside
of the machine and the catch tray toward the inside of the
machine. Refer to Figures 2-15, 2-16, and 3-16 for
locations.