Hub and spindle, wheel and tire installation – Landoll MCCS2253 18,9 RIGID PULVI-MULCHER User Manual
Page 13
ASSEMBLY
2-3
Hub and Spindle, Wheel and Tire
Installation
1.
Install a Hub and Spindle into each Rockshaft sleeve.
Secure with 3/8-16 X 3” Capscrew and Hex Nut. See
Figure 2-3.
2.
Mount a Wheel and Tire Assembly onto each hub
with 1/2-20 X 1" Wheel Bolts. Torque to 80-85 Ft-lbs.
See Figure 2-4.
Figure 2-3: Hub & Spindle Assembly
Figure 2-4: Wheel and Tire
Hub & Spindle
Assy.
Capscrew
3/8 X 16 X 3
Hex Nut 3/8-16
Wheel Bolt
1/2-20 X 1