JUMO 702540 TDA-300 / TDA-3000 - Handheld thermometer Operating Manual - Manual (Page 54)

9 Evaluating data with a PC
54
9.2 Stored data
Three files are created in the TDA and are ready for readout.
- LOG_M0507066.CSV: recorded temperature data
- TAG_M0507066.CSV: TAG names and limits
- SETUP_M0507066.CSV: user name and configuration data
LOG_*.CSV The file contains the recorded temperatures. It is stored in the TDA in the
“Read only” mode. The file can be opened and evaluated, for instance through
spreadsheet programs, and copied to the hard disk of the PC.
The file contains the following data: memory number, date, time, temperature,
TAG number and user number.
H
The files - in CSV format (Comma Separated Values) - are only
created when the TDA is connected to a PC.
The characters in the file name in front of the “_” character are
fixed, i.e. they are the same for different instruments. The names
after the “_” differ. This makes it possible to distinguish between
data from different instruments.
A
If the file is deleted in the TDA, the data in the TDA memory will
also be lost. Then it will no longer be possible to check the data
with the TDA.