JUMO 702540 TDA-300 / TDA-3000 - Handheld thermometer Operating Manual - Manual (Page 45)

45
7 User names
This chapter describes how to handle user names.
Different user names can only be implemented with the handheld TDA-3000.
This enables different users (persons) to acquire data at the same or at
different measurement points using the same instrument.
The measurement, user and measurement point designation (TAG name) as
well as the date and time are stored together.
You can allocate a user name (up to 11 characters) for each user number. You
can set the user by selecting the user number. The user that has been set in
this way, remains active in the memory until the instrument is switched off.
Menu
User (Fn8)
The present user is selected
through the user number.
* If no name has been entered
yet, then no name will be
displayed. (For instance, for
new devices that have not
yet been configured)