JUMO 702540 TDA-300 / TDA-3000 - Handheld thermometer Operating Manual - Manual (Page 32)

5 Data logger
32
5.1 Manual logging
With manual logging (interval = off), you can record the measurement in the
memory by using the REC key. REC will appear in the LCD display only when
the REC key is pressed.
The following can be logged:
- the measured temperature,
- the date (without “year”),
- the TAG name and
- the user name.
Logging Hold down the REC key during measurement. The measurement shown on the
screen is recorded in the memory.
Checking the
logged data
h Press the MENU/POWER key during normal display in order to view the
memory screen (Fn1) in the display.
h Press the SET key to check the measured data on the memory screen.
If you want to carry out an ongoing check of two or more data:
h Press the DOWN
( ) or UP key ( )
It is possible to change the display (between TAG name and memory date) in
the message line. To do this, press the LEFT or RIGHT key ( , ) .
Measurement is
within the limits
Normal display while
REC key is pressed
REC only appears in the
LCD display when the REC
key is pressed.
Memory number:
indicates the memory
number under which
the measured data
are recorded.
Shows the total number
of measured data.
::