JUMO 702540 TDA-300 / TDA-3000 - Handheld thermometer Operating Manual - Manual (Page 37)

37
5 Data logger
5.3.2 Searching data with a specific LOG No. (LOG jump)
The more data you have, the more difficulties you will have in finding the
required data. Using the LOG jump function you can search the required data
number and display it readily on the screen.
h In normal display, press the MENU/POWER key
and then the SET key.
The memory screen (Fn1) is displayed.
h Press the MENU/POWER key twice to display
the LOG jump screen.
The number of the current memory location is
shown blinking.
h Press the DOWN
( ) , UP ( ) , LEFT ( ) or
RIGHT key ( ) until the required number of the
memory location you have been searching is
displayed.
h Press the SET key.
The screen with the required memory number is
shown. Press the ESC key twice to return to
normal display.
H
How can I cancel the LOG Jump function?
During selection of the memory number, press the
ESC key. The display returns to the memory screen (Fn1).
blinking
blinking