Aastra Telecom 480i CT (Release 1.4) - Manual (Page 58)

52 / IP Phone User Guide
Pairing and Unpairing Cordless Handset to B
a
se
Pairing and Unpairing
Cordless Handset to Base
Pairing Handset
All handsets must be paired to a
Base Station. This is performed
from both the base and the
cordless handset. Successful
pairing will add the handset name
to the handset list on the base and
synchronize the handset list from
the base to the newly paired
handset. A total of 4 handsets can
be paired to a single 480i CT base.
Note: When performing the handset
pairing, it is recommended that
thehandset be within 3 feet of the
480i CT base.
1. On the 480i CT base press
%.
2.Select 11.Handset Pairing
3.Select Pair
Note: If there are already 4 handsets
paired to the base, you will not be
able to select the Pair option.
4.On the 480i CT cordless handset
press Â.
5.Select 7- Hset pairing
Note: If the handset has already been
paired, the softkey will be
labelled as Remove instead of
Pair
.
Ensure the handset being paired is
within close proximity to the base.
It is recommended that the
handset be within 3 feet from the
480i CT base.
Note: It is recommended that both
steps 6 and 7 be executed at the
same time.
6.On the 480i CT base, select Done.
7.On the 480i CT cordless handset,
press the softkey for Pair.
Options List
Show
Done
9.SIP Settings
10.Phone Status
11.Handset Pairing
Options List
Show
Select
Done
Pair
Remove
Cancel
7 - Hset pairing
´ ½ = Scroll
Pair
Options List
Done
Cancel
Attempting to pair...
Attempting to
pair...
Cancel