Aastra Telecom 480i CT (Release 1.4) - Manual (Page 25)

/ IP Phone User Guide 19
Handli
ng Calls
from
the 48
0i CT Base
Station
Ending Calls
To end a call, you first need to
connect to the call if not already
connected. Press Nor the line/call
appearance button of the active call.
If connected through the handset,
you can also place the handset back
on hook to end the call.
Call Forwarding
The call forwarding feature on the
IP phone allows incoming calls to
be forwarded to another
destination. The phone sends the
SIP message to the SIP proxy,
which then forwards the call to the
assigned destination.
Call forwarding is disabled by
default. Your system administrator
can enable call forwarding on a
phone-wide basis or on multi-line
phones on a per-line basis. If you
have configured call forwarding on
an individual line, then the settings
for this line are used; otherwise,
the phone-wide call forward
settings are used. You can have up
to 9 lines on the 480i CT configured
for call forwarding.
The following are the call forward
modes you can configure for call
forwarding:
Setting Call Forwarding
Use the following procedure to
configure phone-wide call
forwarding.
1. Press % on the phone to
enter the Options List.
2. Select Call Forward.
3. Enter the "Call Forward" num-
ber destination for which you
want your incoming calls to be
forwarded.
Note: If you leave the "Number" field
blank, call forwarding is dis-
abled.
4. Enter the "Call Mode" that you
want to set on your phone.
5. Enter the "Number of Rings"
you want to set before the call is
forwarded. Valid values are 1 to
9.
Note: "Number of Rings" field applys
to No Answer and Busy No
Answer modes only.
6. Press Enter to confirm the set-
tings.
Call
Forward-
Mode Description
Off Disables call forward
All Phone forwards all
incoming calls imme-
diately to the specified
destination.
Busy Phone forwards
incoming calls if the
line is already in use.
No
Answer
Phone forwards the
call if it is not
answered in the speci-
fied number of rings
Busy No
Answer
Phone forwards the
call if either the line is
already in use or the
call is not answered in
the specified number
of rings.
Global Phone uses the phone-
wide call forward set-
ting. This is only valid
when setting the mode
of individual lines.
IP Phone UI