Aastra Telecom 480i CT (Release 1.4) - Manual (Page 28)

22 / IP Phone User Guide
Ha
ndling Cal
ls from the
480i
CT
Ba
se Sta
ti
o
n
Configuring Park /Pickup using
Static Configuration
Use the following procedure to
configure the Park/Pickup call
feature using the static
configuration method.
Note: Aastra recommends you
configure either the static or the
programmable configuration,
but not both.
1. Click on Basic Settings->
Preferences->General.
2. Enter a server value in the Park
Call field to which incoming live
calls will be parked.
Note: For values to enter in this field,
see the table "Park/Pickup Call
Server Configuration Values" on
page 21 .
3. Enter a server value in the
"Pickup Parked Call" field.
Note: For values to enter in this field,
see the table "Park/Pickup Call
Server Configuration Values" on
page 21 .
4. Click to save your
changes.
5. Click on Operation->Reset.
6. In the "Restart Phone" field
click to restart the IP
phone.
Park/Pickup Programmable
Configuration
The programmable method of
configuration creates park and
pickup softkeys keys that you can
configure on the 480i CT phone.
You can set a softkey as "Park" or
"Pickup" and then:
• specify a customized label to
display on the Phone UI
• specify a value
• specify which line to use
• specify the state of the park and/
or pickup keys
On the IP phone UI, the Park/
Pickup feature displays the
following:
• When a call comes in, and you
pickup the handset, the custom
label that you configured for the
Park softkey displays on the
Phone UI.
• After the call is parked, the label
that you configured for the
Pickup softkey displays on other
phones in the network. You can
then press the "Pickup" softkey,
followed by the applicable value
to pickup the call on another
phone in your network.
On the 480i CT, the customized
labels apply to the base unit only.
On the 480i CT handset, pressing Ï
displays the default labels of
"Park" and "Pickup".
Notes:
1. On the 480i CT, the customized
labels apply to the base unit only.
On the 480i CT handset, pressing
Ï displays the default labels of
"Park" and "Pickup".
2. On the 480i CT, the old softkey
labeled "Pickup" has been
renamed to "Answer". This
softkey uses the old functionality -
when you pickup the handset, you
see a softkey labeled "Answer".
You can then press this key to pick
up an incoming call. Do no
confuse this feature with the new
Park/Pickup configuration feature.
Aastra Web UI