INFICON Sensistor ISH2000 Hydrogen Leak Detector - Manual (Page 46)

Sensistor ISH2000 Technical Reference Manual (TRM) EN- 46
C 200
C 200 Control panel
Description
Figure C-1: Sensistor ISH2000 control panel
Graphic interface
The display shows:
• indicator bar in Detection Mode and the figures in Analysis Mode.
• seven main menus. Their positions are indicated on a horizontal scale. Change
from one menu to another using the < and > buttons.
• main menus have submenus, which are also indicated by horizontal scales
and can be selected using the < and > buttons.
• scales for setting numeric values, languages, etc.
• messages.
Sensistor ISH2000C:
• A battery status indicator in the upper right corner, where 13.5 V indicates
discharged state and 16.0 V indicates that the battery is fully charged.
• six main menus. Their positions are indicated on a horizontal scale. Change
from one menu to another using the < and > buttons.
LEDs
The two LEDs indicate the status of the instrument as follows:
• Green flashing slowly, during warming up phase.
• Green fixed light indicates that instrument is ready and hydrogen signal is
below Reject Level limit.
• Red fixed light together with Reject on display means the instrument has
detected a leak larger than the set alarm limit. Red flashing rapidly, check mes-
sage on screen. (See “Trouble-shooting” on page 74.
Probe connector
Earphone socket
LEDs
Control push-buttons