INCRA Miter 1000SE User Manual

Owner’s manual, Safety

Manufactured by Taylor Design Group, Inc. P.O. BOX 810262 Dallas, TX 75381

When using the INCRA Miter1000SE in conjunction with any other tool, first read and follow all instructions and safety

information in that tool’s owner’s manual.

Never let the saw blade come in contact with the aluminum or steel components of the INCRA Miter1000SE.

When using the INCRA Miter1000SE, always keep your hands clear of the saw blade and the line of cut.

Always turn off the power and make sure that the saw blade comes to a complete stop before changing the setting of any part of

the INCRA Miter1000SE.

Always securely tighten the large black clamping knob before starting any cut.

Wear safety glasses, hearing protection, and follow all normal shop safety practices.

After making any adjustments to the miter angle or fence position of your INCRA Miter1000SE, always verify safe clearance

between the blade and fence before turning on the saw.

After making any adjustments to the fence position on the INCRA Miter1000SE, always make sure that the two socket head

screws are securely tightened.

When using the INCRA Flip Shop Stop to position a piece for a cut, always hold or otherwise clamp the board between the stop

and the blade.

Owner’s Manual

w w w . i n c r a . c o m

Important safety instructions for using the

INCRA Miter1000SE

SAFETY:

Before using the

INCRA

Miter1000SE, read and
follow all of the instructions
and safety information in
this owner’s manual.