beautypg.com

INCRA Jig Fence System User Manual

Safety, Owner’s manual

background image

1

• Before using the INCRA Fence System and Right

Angle Fixture, carefully read and follow all of the
instructions and safety information in this manual.

• Always turn off the power and make sure that the bit or

blade is fully stationary before moving any component
of the INCRA Fence System to any new setting.

• When using the INCRA Fence System and Right Angle

Fixture with any other tools, make sure that all safety
guards and other safety equipment supplied by the
manufacturer of that tool are securely in place and
functional

• Never let any part of the INCRA Fence System or Right

Angle Fixture interfere with another tool’s safety guards
or other safety equipment.

• Use appropriate safety devices. Keep hands clear of

the bit or blade. Always use a push stick, rubber soled
push block, or other safety devices to keep your hands
safely away from the cutting tool.

• Never let the bit or blade come in contact with the

aluminum body of the INCRA Right Angle Fixture.

• Never attempt to hold your work to the INCRA Right

Angle Fixture using your hands alone. Always use a
clamp or other suitable holding device to securely hold
your work to the front face of the fixture.

• Never let the bit or blade come in contact with the

wooden runners on your INCRA Right Angle Fixture.
Always clamp a wooden stop to the outfeed end of the
fence to stop the forward motion of the Right Angle
Fixture before the bit contacts the wooden runners.

SAFETY

Important safety instructions for using the INCRA Fence System

Owner’s Manual

Please read this Owner’s
Manual before use and keep it at
hand for reference.

From simple routing operations
such as edge forming, grooving,
dadoing, or rabbeting, to high
quality joinery, your new INCRA
Fence System and Right Angle
Fixture combined with the INCRA
Jig Positioner will provide an
unlimited source of precision and
satisfaction for all your router table
projects. The T-slot design of the
Fence and Right Angle Fixture
permit the easy addition of user
made sub fences and auxiliary
faceplates for specialty
applications. Durable aluminum
construction and double laminated
Fence and Stop ensure reliable
performance for years to come.

Made in America by:

Taylor Design Group, Inc.
PO Box 810262
Dallas, TX 75381
Phone: 972-242-9975

www.incra.com

©

2005 by Taylor Design Group, Inc. Printed in the U.S.A. INCRA is a registered trademark of Taylor Design Group, Inc.

INCRA Products are protected by the following US Patents: #4,793,604, #4,930,221, #5,195,730, #5,725,074, #5,423,360, #5,716,045, #6,237,457, #6,557,601, #6,672,190

Other patents granted or pending.