INCRA IBOX User Manual

INCRA Tools

Manufactured by Taylor Design Group, Inc. P.O. Box 810262 Dallas, TX 75381

Before using the INCRA IBOX, read and follow all instructions

and safety information in this manual.

When using the INCRA IBOX in conjunction with any other tool,

first read and follow all instructions and safety information in that

tool’s owner’s manual.

Always turn off the power and make sure that the bit or blade is

fully stationary before moving any part of the INCRA IBOX to

any new setting.

Always use a wooden handscrew clamp to secure your workpiece

to the INCRA IBOX before making any cut.

Before making a cut, always make sure that the blade guards are in

place and that the fasteners that secure the stock ledges and blade

guards are securely tightened.

Wear safety glasses, hearing protection and follow all normal shop

safety practices.

When using the INCRA IBOX with other tools, make sure that all

safety guards and other safety equipment supplied by the manufac-

turer of that tool are securely in place and functional. Never let the

INCRA IBOX interfere with another tool’s safety equipment.

Keep hands safely clear of the bit or blade.

DO NOT alter or modify the INCRA IBOX

Do not attempt to use the INCRA IBOX with a “wobble” dado

blade.

Do not attempt to use the INCRA IBOX with any cutter smaller

than 1/8”.

If using with a SawStop table saw, put the SawStop in the Bypass

Mode before calibrating, adjusting, or checking blade clearances.

Return it to normal operation before making a cut.

wner’s

anual

w w w . i n c r a . c o m

Important safety instructions for using the

INCRA IBOX

SAFETY

Before using the

INCRA IBOX,

read and follow all of the
instructions and safety infor-
mation in this owner’s manual.

From delicate 1/8” fingers to bold 3/4” joints to exciting new

box joint variations, your New INCRA IBOX is designed to

provide the perfect resource for your next joinery task. The

dual-pitch lead screw driven positioning engine controls both

pin width and spacing with a single adjustment knob while

INCRA’s GlideLOCK™ adjustable miter bar provides smooth

tracking at either your table saw or router table. Before using

your New IBOX, please take the time to read this manual and

be sure to watch the included DVD for some exciting new box

joint techniques, tips and tricks.

CONteNts

safety ................................................................ 1
Preliminary setup ............................................ 2
setting up at the table saw ............................ 3
setting up at the Router table ....................... 4
stock Ledges, Blade Guards & Backing Board .... 5
Operations – Cutting a Box Joint .................... 7
tips and techniques ......................................... 12