INCRA Pro Fence System - Manual

Fence System
PRO
Please be sure to
read this Owner’s
Manual before use
and keep it at hand
for future reference.
SAFETY
Important safety instructions
for using the INCRA PRO Fence
System
■ Before using the INCRA PRO Fence
System, read and follow all of the
instructions and safety information in
this manual.
■ When using the INCRA PRO Fence
System in conjunction with any
other tool, first read and follow all
instructions and safety information in
that tool’s owner’s manual.
■ Use appropriate safety devices.
Keep hands clear of the bit or blade.
Always use a push stick, rubber
soled push block or other safety
devices to keep your hands safely
away from the cutting tool.
■ Never let any part of the INCRA
PRO Fence System interfere with
another tool’s safety guards or other
safety equipment.
■ Never let the bit or blade come into
contact with the aluminum body of
the INCRA PRO Fence, INCRA Stop
or Stop Extender Bar.
■ Always turn off the power and
make sure that the bit or blade is
fully stationary before changing the
setting of any part of the INCRA
PRO Fence, INCRA Stop or Stop
Extender Bar.
■ Wear safety glasses, hearing
protection and follow all normal shop
safety practices.
■ When using negative fence settings
in which the bit is partially recessed
in the fence notch, always insure
that the bit is centered within the
notch.
■ Do not use any router bit with a
diameter greater than 3 ⁄ 4 " without
first mounting a wooden auxiliary
fence as detailed on page 8.
■ When using the Stop Extender
Bar, make sure that it is securely
fastened to the fence with the
supplied mounting hardware. When
not in use, store the Extender
Bar inside the upper T-slot on the
Fence and secure in place with the
supplied hardware.
WARRANTY
Taylor Design Group, Inc. warrants this product for one year from date of purchase. We
will repair, without charge, any defects due to faulty material or workmanship, or at our
option, replace the product free. Please return the failing part only, transportation prepaid,
along with a description of the problem to the address on the back of this manual.
LIFETIME WARRANTY ON POSITIONING RACKS
If an INCRA positioning rack in this tool becomes damaged for any reason, Taylor Design
Group will replace it free of charge for as long as you own the tool. Return the damaged
rack, transportation prepaid, and allow 1 to 2 weeks for delivery.
NOTE: Replacements cannot be sent unless damaged racks have been received
by Taylor Design.
Mounted to your INCRA JIG, the
INCRA PRO Fence System provides
a solid, smooth, and flat guide surface
for the various cutting operations in
your shop. A top-mounted sliding
scale and INCRA’s patented saw-
toothed racks provide the means for
easy and extremely accurate stopped
cut setups using the INCRA Stop.
Coupled with the added convenience
and function of a self-storing Stop
Extender Bar with its own sliding
scale and variable stop, the INCRA
PRO Fence System will add new
dimensions to your abilities in the
wood shop.