HMC Electronics EVO7 Cable Tie Gun, Adjustable Tension User Manual

Page 5

TENSION

Want to select a specifi c level of tie tension for bundling? Simply rotate the tension knob

to any of the easy-to-read, pre-set tension settings. Standard cable tie installation tools

stretch the tie while cutting, causing the tie end to retract into the head, or leave a

protruded edge. But with EVO 7, the tie is cut at precisely the tension you select for a

clean, fl ush cut at the tie head – without overstressing the tie.

LOCK

With TLC Technology, the patent-pending locking mechanism detects when the desired

tension is met, and locks the tie in place prior to cutting. At that moment, all force applied

to the trigger is directed to cutting the tie. That means the trigger only needs to be pulled

far enough to cut the tie, reducing the range of motion and subsequent strain on the hand

and arm.

Once the tie is locked in place, the tool operator needs only to advance the trigger

enough to cut the tie. Since there is no dynamic tension (stretching) on the cable tie, all

energy is focused on driving the blade through the tie, resulting in a clear, fl ush cut, time

after time –

all with no jarring motion to the hand or arm.

CUT

LOCK

Documentation Provided By HMC Electronics

33 Springdale Ave. Canton, MA 02021

(800) 482-4440