HMC Electronics C900 Chemtronics Twillwipes - Manual

CHEMTRONICS
®
Technical Data Sheet
Twillwipes
™
TDS #C600
PRODUCT DESCRIPTION
Twillwipes
™
are made of 100% cotton twill
fabric, cut on the bias to prevent fraying. These
wipers have excellent absorbency, as well as high
strength, especially when wet with water.
Twillwipes
™ are ideal for high temperature
applications that would melt most other wipes.
Excellent temperature, organic solvent, base and
dilute acid resistance
Excellent durability and strength
Excellent particle entrapment
High absorbency capacity and rate
Packaged in a Class 100 environment
Low linting
Commonly used in Class 1000 and Class 10,000 cleanrooms
10,000 cleanrooms
TYPICAL APPLICATIONS
Twillwipes
™ can be used to:
Clean Water Processing Areas
Clean-up Bases and other Chemical spills
Wipe Down Machinery and
Instrumentation
Clean Photo-Mask Areas
Wipe High temperature Equipment
COMPATIBILITY
Twillwipes
™ are compatible with most
common solvents such as isopropyl alcohol,
methanol. and ketones such as acetone or
methyl ethyl ketone. These wipes are
generally compatible with strong bases and
dilute or weak acids. These wipes can also
withstand temperatures of up to 302
0
F (150
0
C).
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Wipe Material
100 % Woven
Cotton Twill
Material, Bias Cut
Wipe Product
Codes
C600 / C900
Availability
6” x 6” / 9” x 9”
Basis Weight
165 g/m 2
Absorbency
(Capacity)
( Rate)
10 x
1 Sec
Strength
92 lbs.
(Tensile Average)
Thickness
0.25 mm
(0.010 inches)
The wipes were tested by Particle Measurement
Technology. The wipe tests were done using the
recommended practices of the Institute of
Environmental Sciences, Swabs and Wipes
Working Group.
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440