HMC Electronics SIP100P Chemtronics Alcohol Presaturated Wipes User Manual
Page 2

USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
SIP100P tub directions:
Remove top of container and peel foil seal
from top of tub. Pull the first wipe from
center of roll and feed it through the opening
in the lid. Replace lid and pull first wipe from
the tub and separate at perforation. Keep
container closed to prevent wipes from drying
out.
IPA100B box directions:
Open box and remove wipes from pouch
found inside box. Pull wipes as needed from
the box and close box between uses to
prevent wipes from drying out.
Cleaning directions:
General cleaning: Wipe surfaces thoroughly
to remove contaminants. When removing
heavy soils, use a clean wipe for final wipe
down.
Stencil cleaning: Wipe away residual solder
paste until surface is thoroughly cleaned.
Repeat with a clean wipe to remove any trace
contaminants.
TECHNICAL & APPLICATION
ASSISTANCE
ITW Chemtronics
®
provides a technical
hotline to answer your technical and
application related questions. The toll free
number is: 1-800-TECH-401.
AVAILABILITY
SIP100P Presaturated Wipes (100/tub)
IPA100B C-Fold Wipes (100/box)
ENVIRONMENTAL IMPACT DATA
HCFC-141b
HCFC-225
None
None
HFC
nPB
None
None
Hydrochlorofluorocarbons (HCFCs) are regulated
under the Montreal Protocol as Class II ozone
depleting substances. HCFC-141b is no longer
produced in the US under this legislation. HCFC-
225 is planned for production phase-out in 2015.
Hydrofluorocarbons (HFCs) are not currently
regulated.
EPA has listed n-propyl bromide (nPB) as an
acceptable alternative to ozone depleting substances
in metal, precision, and electronics cleaning under
Section 612 of the Clean Air Act.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
ITW CHEMTRONICS
®
does not guarantee the
accuracy of the data and assumes no liability in
connection with damages incurred while using it.
Chemtronics
® is a registered trademark of ITW Chemtronics.
All rights reserved.
MANUFACTURED BY:
ITW CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. F (02/08)
DISTRIBUTED BY:
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440